| 4-501.12 / CUTTING SURFACES Core Item THE CUTTING BOARDS NEED TO BE RESURFACED OR REPLACED. Resurfaced or discard cutting boards or blocks with excessive scratching or scoring. Correct By: 16-Dec-2014.  |
| 4-602.13 / NONFOOD CONTACT SURFACES Core Item .Clean the following: the inner and outter surfaces of the reach in freezer, glass door on the reach in cooler, flooring under the cooking equipment, inside the fryer doors, and the shelving in the walk in cooler. These SURFACES ARE not cleaned on a frequent basis. Clean all equipment on a routine basis to prevent accumulation of soil residues. Correct By: 2-Dec-2014. Correct By: 16-Dec-2014. |
| 6-202.15 / OUTSIDE OPENINGS, PROTECTED Core Item Eliminate the gap under the rear door. Privide a sweep on the rear door. To prevent the entrance of insects and rodents make appropriate repairs. Correct By: 2-Dec-2014. Correct By: 16-Dec-2014. |
| The following violation(s) have been corrected since the last inspection. |
|---|
| 4-501.11/GOOD REPAIR, PROPER ADJUSTMENT, AND OPERATION RESECURE THE SCREEN TO THE REAR DOOR SURFACE OR REPLACE IT. PROVIDE A SWEEP ON THE REAR DOOR. Maintain equipment in good repair. Correct By: 3-Dec-2014. Action taken: The rear screen door has been removed leaving the steel door only. |
| 4-501.11/GOOD REPAIR, PROPER ADJUSTMENT, AND OPERATION Replace the splitting gaskets on the reach in cooler (glass door) and the reach in freezer ( bottom of right door) Maintain equipment in good repair. Correct By: 22-Dec-2014. Action taken: The gaskets have been replaced as required. |
| Comments |
|---|
| A second follow up inspection is not necessary at this time. Correct the remaining violations as noted in this report. |