No critical violations were documented at the time of inspection.
No violations were documented at the time of inspection.
Facility Type: Commercial FSO < 25000 sq. ft.
[?] Inspection Type: Follow-up
Inspection Date: 18-August-2014
The following violation(s) have been corrected since the last inspection. |
---|
3717-1-04.4(L)/Mechanical warewashing equipment - hot water sanitization temperature The rinse temperature in a mechanical warewashing operation is not adequate to sanitize dishes and utensils. In a mechanical operation, the temperature of the fresh hot water sanitizing rinse as it enters the manifold may not be more than 194˚F, or less than: For a stationary rack, single temperature machine, 165˚F; or for all other machines, 180˚F. |
3717-1-05.1(C)(1)/Handwashing sink - required water temperature Observed a handwashing sink without water at the required temperature. Hot water at handwashing sink closest to dishwashing machine not reaching proper temperature. A handwashing sink shall be equipped to provide water at a temperature of at least 100° F (thirty-eight degrees Celsius) through a mixing valve or combination faucet. |
Comments |
---|
Thank you for correcting all violations. Good Job. |