Warren County Combined Health District

[?] A summary of the violations found during the inspection are listed below.

Critical
Non-critical

3717-1-04.5(D) / Nonfood-contact surfaces - cleaning frequency.
The back panel plate that holds the dispensing nozzles had a little mold growth. The PIC immediately had an employee clean and sanitize the area.
Correct By: 17-Oct-2019
3717-1-06.4(A) / Repairing.
Corrected During Inspection The walk in freezer had a little ice build up on condenser fan, ceiling, and under food shelving. The PIC called for maintenance and they will replace the condenser fan and remove the ice build up from the floor under the shelving. Furthermore, the fryers were leaking some hot grease on the floor under fryers only. A work order was placed immediately for repair. The PIC will send photos once every thing is corrected to kcooper@wcchd.com.
Correct By: 25-Oct-2019

Inspection Information

Facility Type: Commercial FSO < 25000 sq. ft.

[?] Inspection Type: Complaint

Inspection Date: 17-October-2019

Comments
The inspection today was to verify concerns due to the following issues: floors not being mopped and swept, counter tops not being cleaned, drink machine fixtures not being properly soaked with mold growing in them. There was also a concern with the walk in cooler. Upon my investigation, the floors were recently mopped and swept, the counter tops were clean, and the drink machine soda dispensing nozzles were and had been cleaned on a routine basis. No mold observed on dispensing nozzles. However, the back panel plate that holds the dispensing nozzles had a little mold growth. The PIC immediately had an employee clean and sanitize the area. There were no issues with the walk in cooler. However, the walk in freezer had a little ice build up on condenser fan and under food shelving. The PIC called for maintenance and they will replace the condenser fan and remove the ice build up from the floor under the shelving. Furthermore, observed grease leaks under the fryers. The PIC will send photos once every thing is corrected to kcooper@wcchd.com.

Comments

The inspection today was to verify concerns due to the following issues: floors not being mopped and swept, counter tops not being cleaned, drink machine fixtures not being properly soaked with mold growing in them. There was also a concern with the walk in cooler. Upon my investigation, the floors were recently mopped and swept, the counter tops were clean, and the drink machine soda dispensing nozzles were and had been cleaned on a routine basis. No mold observed on dispensing nozzles. However, the back panel plate that holds the dispensing nozzles had a little mold growth. The PIC immediately had an employee clean and sanitize the area. There were no issues with the walk in cooler. However, the walk in freezer had a little ice build up on condenser fan and under food shelving. The PIC called for maintenance and they will replace the condenser fan and remove the ice build up from the floor under the shelving. Furthermore, observed grease leaks under the fryers. The PIC will send photos once every thing is corrected to kcooper@wcchd.com.