| 4-501.12 / CUTTING SURFACES Core Item Resurface or replace the grooved and discolored cutting boards (on the cold top reach in cooler and the portable ones). Resurfaced or discard cutting boards or blocks with excessive scratching or scoring. Correct By: 13-Oct-2020  |
| The following violation(s) have been corrected since the last inspection. |
|---|
| 5-202.13/BACKFLOW PREVENTION, AIR GAP No air gap provided on the three compartment sink. Drain line from the three compartment sink was observed lying below the flood rim of the floor drain. Provide an air gap between the drainline equipment and sewer system to protect water supply Action Taken: A photo to the drain line positioned above the floor drain has been provided as required. |
| 6-501.11/PHYSICAL FACILITIES - GOOD REPAIR Repair the rear steel door. Provide a sweep on both sides. The inner surface is curling upwards and the sweep on the outer surface of the door is broken. Maintain the physical facilities so they are in good repair at all times. Correct By: 03-Oct-2020 Action Taken: A sweep has been provided on the rear steel door as required. |
| Comments |
|---|
| Todays inspection was a virtual follow up inspection. The Priority violation has been corrected as required. No enforcement action is required at this time. The remaining uncorrected violation shall be checked at the next routine inspection. Photos were provided by the person in charge. |