[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (C)(2) / pH is within 7.2 to 7.8
pH was > 8.0.
pH must be within the range of 7.2 to 7.8. Treat the pool water so that the pH is within the acceptable range.
3701-31-04(D) (6) (a) / Spa bromine disinfectant residual is above 4 ppm.
Spa bromine disinfectant residual was 0 ppm.
Spa bromine residual MUST be 4 ppm or above to ensure disinfection. Do not operatre the spa until the bromine disinfectant residual is at 4 ppm or above.


Inspection Information


Facility Type: Spa

[?] Inspection Type: Follow-up

Inspection Date: 04-April-2014

The following violation(s) have been corrected since the last inspection.
3701-31-04 (C)(7)/Spa water temperature is less than 104 degrees Fahrenheit/ thermometer is provided
Spa water temperature was 104.6 degrees Fahrenheit.
Do not operate the spa at a water temperature greater than 104 degrees Fahrenheit. Reduce the water temperature to 104 degrees or less.
3701-31-04 (B)(1)(c)/Minimum disinfection residual are provided as required
Bromine disinfectant residual was less than 4 ppm for the spa
Do not operate the pool when the disinfectant residuals are less than what is required. Ensure the bromine disinfectant residual is at 4 ppm or above prior to placing the spa back into operation.
Comments
THE SPA IS CURRENTLY CLOSED. Please keep the spa closed until the bromine residual is at 4.0 ppm or higher. Please call our office when the proper residual has been achieved.