3717-1-04.1(Y) / Temperature measuring devices.
Cold or hot holding equipment did not contain a thermometer, or the thermometer was not correctly placed.
A properly designed temperature measuring device as specified in this rule shall be located in the warmest part of a cooling unit or the coolest part of a food warming unit. PROVIDE THERMOMETERS FOR INSIDE OF ALL COOLERS AND FREEZERS.
3717-1-04.2(I) / Sanitizing solutions - testing devices.
There is no test kit available for measuring the concentration of the sanitizer.
To ensure proper sanitization, a test kit or other device that accurately measures the concentration in PPM (mg/L) of sanitizing solutions shall be provided.
3717-1-06.2(B) / Handwashing cleanser - availability.
Corrected During Inspection Observed no supply of hand cleaning liquid, powder or bar soap at the handwashing sink(s).
To ensure proper cleaning of hands, each handwashing sink or group of two adjacent handwashing sinks shall be provided with a supply of hand cleaning liquid, powder, or bar soap. PROVIDE SOAP AT ALL HAND SINKS.
3717-1-06.2(C) / Handwashing sinks - hand drying provision.
Corrected During Inspection Observed no towels or hand drying device at the handwashing sink(s).
To prevent contamination by hands, each handwashing sink or group of adjacent handwashing sinks shall beprovided with: Individual, disposable towels; a continuous towel system that supplies the user with a clean towel; a heated-air hand drying device; or a hand drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures. PROVIDE PAPER TOWELS AT ALL HAND SINKS.