[?] A summary of the violations found during the inspection are listed below.

3717-1-04.1(Y) / Temperature measuring devices.
Cold or hot holding equipment did not contain a thermometer, or the thermometer was not correctly placed.
A properly designed temperature measuring device as specified in this rule shall be located in the warmest part of a cooling unit or the coolest part of a food warming unit.
3717-1-04.2(G)(2) / Food temperature measuring devices - measuring the temperature of thin foods.
A thermometer capable of accurately measuring the temperature of thin foods was not available.
To prevent foodborne illness, a food temperature measuring device with a suitable small-diameter probe shall be provided and readily accessible to measure the temperature of thin foods, such as meat patties or fish fillets.
3717-1-04.6(A) / Food-contact surfaces and utensils - sanitization required
Equipment food-contact surfaces and utensils were not being sanitized.
Equipment food-contact surfaces and utensils shall be sanitized.SANITIZE INSIDE OF ICE MACHINE(WATER LINE)
3717-1-05.1(S)(1) / Plumbing system - maintained in good repair.
The plumbing system was not properly repaired.
To prevent health hazards, a plumbing system shall be repaired according to the Ohio building code.PROVIDE COLD WATER AT HANDSINK.
3717-1-06.2(B) / Handwashing cleanser - availability.
Observed no supply of hand cleaning liquid, powder or bar soap at the handwashing sink(s).
To ensure proper cleaning of hands, each handwashing sink or group of two adjacent handwashing sinks shall be provided with a supply of hand cleaning liquid, powder, or bar soap.
3717-1-06.2(C) / Handwashing sinks - hand drying provision.
Observed no towels or hand drying device at the handwashing sink(s).
To prevent contamination by hands, each handwashing sink or group of adjacent handwashing sinks shall beprovided with: Individual, disposable towels; a continuous towel system that supplies the user with a clean towel; a heated-air hand drying device; or a hand drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures.


Inspection Information


Facility Type: Commercial FSO < 25000 sq. ft.

[?] Inspection Type: Standard

Inspection Date: 10-September-2015