3717-1-04.3(B) / Fixed equipment installation - spacing or sealing.
Fixed equipment did not appear to be properly sealed or spaced for cleaning. >> OBSERVED A GAP BETWEEN THE 3 COMPARTMENT SINK AND THE WALL WERE WATER CAN SPLASH AND MOLD CAN GROW AND A GAP BETWEEN THE HANDWASHING SINK IN THE BATHROOM
Equipment that is fixed shall be installed so that it is spaced to allow access for cleaning, from adjoining equipment, walls, and ceilings a distance of not more than one thirty-second inch or one millimeter; or sealed to adjoining equipment or walls, if the equipment is exposed to spillage or seepage; Counter-mounted equipment shall be installed to allow cleaning of the equipment and areas underneath and around the equipment as specified in this rule.
3717-1-04.4(A)(1) / Equipment - good repair and proper adjustment.
Equipment and/or components are not maintained in good working order. >> OBSERVED THE COOLER AT 45 DEGREES FAHRENHEIT NOT REACHING TEMPERATURE
Equipment shall be maintained in a state of repair and condition that meets the requirements specified under rules 3717-1-04 and 3717-1-04.1 of this code.
3717-1-06.4(F) / Drying mops.
Observed mops being dried using an unapproved method >>> MOPS WERE STORED ON FLOOR .
After use, mops shall be placed in a position that allows them to air-dry without soiling walls, equipment, or supplies.