[?] A summary of the violations found during the inspection are listed below.

3717-1-05.1(D) / Backflow prevention - air gap.
Critical Observed the air gap between a plumbing fixture and a piece of equipment that was not sufficient to prevent back siphonage of contaminated water.OBSERVER ICE MACHINE DRAIN PIPE IS INTO THE DRAIN
To prevent contamination, an air gap between the water supply inlet and the flood level rim of the plumbing fixture, equipment, or nonfood equipment shall be at least twice the diameter of the water supply inlet and may not be less than one inch (25 millimeters).PROVIDE A PROPER AIR GAP DISTANCE A BACKFLOW PREVENTION Correct By: 24-Jan-2018

3717-1-02.4(A)(2) / Person in charge: assignment of responsibility.
Facility did not have one employee with supervisory and management responsibility and the authority to direct and control food preparation and service with level two certification in food protection.MANAGER IS SERV SAFE CERTIFIED
At least one employee that has supervisory and management responsibility and the authority to direct and control food preparation and service shall obtain the level two certification in food protection according to rule 3701-21-25 of the Administrative Code.SUBMIT SERV SAFE CREDENTIALS TO THE OHIO DEPARTMENT OF HEALTH FOR RECIPROCITY
3717-1-04.2(I) / Sanitizing solutions - testing devices.
There is no test kit available for measuring the concentration of the sanitizer.OBSERVED NO TEST KITFOR SANITIZER
To ensure proper sanitization, a test kit or other device that accurately measures the concentration in PPM (mg/L) of sanitizing solutions shall be provided.PROVIDE TEST KIT FOR SANITIZER IN ORDER TO MEASURE SOLUTION STRENGHT
3717-1-04.4(B) / Cutting surfaces.
The surfaces of cutting blocks or boards were severely scratched or scored and could not be effectively cleaned and sanitized.OBSERVED CUTTING BOARDS ARE SERVERELY SCORED
Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced if they can no longer be effectively cleaned and sanitized, or discarded if they are not capable of being resurfaced.REPLACEOR RESURFACE CUTTING BOARDS TO PROVIDE A CLEANABLE SURFACE


Inspection Information


Facility Type: Commercial FSO < 25000 sq. ft.

[?] Inspection Type: Standard

Inspection Date: 22-January-2018