[?] A summary of the violations found during the inspection are listed below.

3717-1-05.1(C)(1) / Handwashing sink - required water temperature
Observed a handwashing sink without water at the required temperature. OBSERVED HANDSINK IN WOMEN'S RESTROOM AT 96.7 DEGREES F.
To ensure proper cleaning of hands, a handwashing sink shall be equipped to provide water at a temperature of at least 100° F (thirty-eight degrees Celsius) through a mixing valve or combination faucet.
3717-1-06.1(C) / Floor and wall junctures - coved, and enclosed or sealed.
The floor and wall junctures are not properly coved or closed, or floor drains were not provided. OBSERVED TOILET BASES IN BOTH RESTROOMS THAT WERE NOT CAULKED.
In FSO's or RFE's in which cleaning methods other than water flushing are used for cleaning floors, the floor and wall junctures shall be coved and closed to no larger than one thirty-second inch; where water flush cleaning methods are used, shall be provided with drains and be graded to drain, and the floor and wall junctures shall be coved and sealed. TO PREVENT MOLD GROWTH FROM MOISTURE BUILD-UP THE PIC SHALL CAULK/SEAL TOILET BASES.


Inspection Information


Facility Type: Commercial RFE < 25000 sq. ft.

[?] Inspection Type: Standard

Inspection Date: 11-July-2017