[?] A summary of the violations found during the inspection are listed below.

3717-1-04.4(A)(1) / Equipment - good repair and proper adjustment.
Repeat Equipment and/or components are not maintained in good working order. THE REACH-IN COOLER NEAR THE BACK DRIVE THRU WINDOW IS NOT WORKING. THE UNIT EITHER NEEDS TO BE REPAIRED (WORKING PROPERLY AT ALL TIMES) OR REMOVED FROM THE FACILITY.
Equipment shall be maintained in a state of repair and condition that meets the requirements specified under rules 3717-1-04 and 3717-1-04.1 of this code.
3717-1-04.4(A)(1) / Equipment - good repair and proper adjustment.
Equipment and/or components are not maintained in good working order. THE FRY FREEZER THAT IS ATTACHED TO THE WALL IS NOT WORKING AND NEEDS TO BE EITHER REPAIRED (WORKING PROPERLY AT ALL TIMES) OR REMOVED FROM THE FACILITY.
Equipment shall be maintained in a state of repair and condition that meets the requirements specified under rules 3717-1-04 and 3717-1-04.1 of this code.


Inspection Information


Facility Type: Commercial FSO < 25000 sq. ft.

Inspection Type: Standard

Inspection Date: 22-December-2015


Comments
SANITIZER AND TEST STRIPS- OK
GLOVES- OK
DATE MARKING- OK
ALL COLD HOLDING IS AT OR BELOW 41F AND ALL HOT HOLDING IS AT OR ABOVE 135F