3717-1-02.2(C) / Hands and arms: when to wash
Critical Food employee(s) did not wash hands in situations that specifically require them to do so. Observed multiple employees donning gloves prior to food preparation without washing hands at time of inspection.
To prevent contamination, food employees shall clean their hands and exposed portions of their arms after switching between working with raw food and with ready to eat food; before donning gloves for working with food; and after other activities that contaminate the hands.
3717-1-03.4(G) / Ready-to-eat, time/temperature controlled for safety food - date marking.
Critical Corrected During Inspection Refrigerated, ready-to-eat, TCS foods held refrigerated for more than 24 hours were not properly date marked. Observed hot dogs and pastrami without date marking at time of inspection.
To prevent foodborne illness, refrigerated, ready-to-eat, TCS food held at a temperature of 41°F or less for more than 24 hours shall be clearly marked at the time of preparation or the time the original container is opened to indicate the date or day, that is a maximum of seven days, by which the food shall be consumed, sold, or discarded. The day the food is prepared or opened is day one.
3717-1-04.5(A)(1) / Cleanliness of equipment food-contact surfaces and utensils.
Critical Repeat Equipment food-contact surfaces or utensils are dirty. Observed the interior surfaces of the ice machine to be dirty at time of inspection.
To prevent contamination, clean the ice machine. Equipment food-contact surfaces and utensils shall be clean to sight and touch.
3717-1-05.3(C) / Backflow prevention.
Critical Repeat Observed a direct connection between the sewage system and a drain originating from equipment in which food, portable equipment, or utensils are placed at time of inspection. The 3-compartment sink is used as a food preparation sink without an air gap.
To prevent health hazards, install a food preparation sink with an air gap. A direct connection may not exist between the sewage system and a drain originating from equipment in which food, portable equipment, or utensils are placed unless allowed by the Ohio building code for: a warewashing machine between its waste outlet and a floor drain when the machine is located within five feet (1.5 meters) of a trapped floor drain and the machine outlet is connected to the inlet side of a properly vented floor drain trap; or a warewashing and culinary sink.