[?] A summary of the violations found during the inspection are listed below.

3717-1-04.2(I) / Sanitizing solutions - testing devices.
Critical Observed there was no test kit available for measuring the concentration of the sanitizer at the time of inspection.
A test kit or other device that accurately measures the concentration in PPM (mg/L) of sanitizing solutions shall be provided.
3717-1-05.1(S)(1) / Plumbing system - maintained in good repair.
Critical Observed the cold water handle for the handwashing sink in the warewashing area was in poor repair at the time of inspection.
A plumbing system shall be repaired according to the Ohio building code. Repair the cold water handle to the handwashing sink so that it functions properly. Correct By: 08-Apr-2014
3717-1-05.3(C) / Backflow prevention.
Critical Observed a direct connection at the time of inspection between the sewage system and a drain originating from equipment (ice bin and ice machine) in which food, portable equipment, or utensils are placed.
A direct connection may not exist between the sewage system and a drain originating from equipment in which food, portable equipment, or utensils are placed unless allowed by the Ohio building code. To protect against contamination, eliminate this direct connection.
3717-1-07.1(J) / Restricted use pesticides - criteria.
Critical Observed an unapproved restricted use pesticide being used at the time of inspection.
Restricted use pesticides shall meet the requirements specified in 40 C.F.R. 152 Subpart I and be applied as specified under paragraph (C)(3) of this rule. Remove the rodent bait pellets from the premises and contact a licensed pest control agency for pest removal.

3717-1-04.1(Y) / Temperature measuring devices.
Cold or hot holding equipment (reach in cooler and reach in freezer) did not contain a thermometer at the time of inspection.
A properly designed temperature measuring device as specified in this rule shall be located in the warmest part of a cooling unit or the coolest part of a food warming unit.
3717-1-06.1(A) / Floors, walls, and ceilings.
Observed wall behind the 3 compartment sink was not smooth and easily cleanable at the time of inspection.
Floors, floor coverings, walls, wall coverings, and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable.


Inspection Information


Facility Type: Commercial FSO < 25000 sq. ft.

[?] Inspection Type: Standard

Inspection Date: 25-March-2014