[?] A summary of the violations found during the inspection are listed below.

3717-1-02.4(C)(13) / Person in charge: duties - ensure employees are properly trained in food safety, including food allergy awareness.
Critical Person in charge did not ensure their employees are properly trained in food safety. Observed multiple critical violations and the employee cooking chicken was unable to describe proper procedures at time of inspection.
To prevent foodborne illness, the person in charge shall ensure that employees are properly trained in food safety, including food allergy awareness, as it relates to their assigned duties.
3717-1-03.4(G) / Ready-to-eat, time/temperature controlled for safety food - date marking.
Critical Observed refrigerated, ready-to-eat, TCS foods held refrigerated for more than 24 hours were not properly date marked at time of inspection (ham, gyro, hot dogs, beef, salsa, tomatoes, etc.).
To prevent foodborne illness, refrigerated, ready-to-eat, TCS food held at a temperature of 41°F or less for more than 24 hours shall be clearly marked at the time of preparation or the time the original container is opened to indicate the date or day, that is a maximum of seven days, by which the food shall be consumed, sold, or discarded. The day the food is prepared or opened is day one.
3717-1-03.4(H)(1) / Ready-to-eat, time/temperature controlled for safety food - disposition.
Critical Corrected During Inspection Observed ready-to-eat, TCS food that had been date marked was not properly discarded when required at time of inspection (turkey with a discard date of 12/19 and beef with a discard date of 12/18).
The PIC voluntarily discarded the food at time of inspection. To prevent illness, refrigerated, ready-to-eat TCS food that has been date marked in the facility shall be discarded if it: (a) exceeds the temperature or time specified in (G)(1) of this rule, except the time the food is frozen; (b) is in a container or package that does not bear a date or day; or (c) is marked with a date or day that exceeds the time and temperature combination specified in (G)(1) of this rule.
3717-1-04.5(A)(1) / Cleanliness of equipment food-contact surfaces and utensils.
Critical Equipment food-contact surfaces or utensils are dirty. Observed the deli slicer and ice machine to be dirty at time of inspection.
Thoroughly clean the equipment. To prevent contamination, equipment food-contact surfaces and utensils shall be clean to sight and touch. The deli slicer shall be completely broken down and properly ware washed at least every 4 hours that it is used.
3717-1-05.3(C) / Sewage and other liquid waste: Backflow prevention.
Critical Repeat Observed a direct connection between the sewage system and a drain originating from equipment in which food, portable equipment, or utensils are placed at time of inspection (food preparation sink has an improper air gap).
Provide a proper air gap. To prevent health hazards, a direct connection may not exist between the sewage system and a drain originating from equipment in which food, portable equipment, or utensils are placed unless allowed by the Ohio building code for: a warewashing machine between its waste outlet and a floor drain when the machine is located within five feet (1.5 meters) of a trapped floor drain and the machine outlet is connected to the inlet side of a properly vented floor drain trap; or a warewashing and culinary sink.

3717-1-04.4(A)(1) / Equipment - good repair and proper adjustment.
Repeat Equipment and/or components are not maintained in good working order. Observed multiple pieces of equipment in disrepair at time of inspection: the kitchen hand washing sink was not working (fixed at time of inspection); the dish machine temperature dial was broken; the preparation cooler door seal was damaged; and multiple light bulbs were not working.
To prevent health hazards, repair the equipment. Equipment shall be maintained in a state of repair and condition that meets the requirements specified under rules 3717-1-04 and 3717-1-04.1 of this code.
3717-1-04.5(A)(3) / Cleanliness of nonfood-contact surfaces of equipment.
Repeat Non-food contact surfaces of equipment are dirty. Observed multiple pieces of dirty equipment at time of inspection (coolers, freezer, microwaves, chip warmer, shelving, etc.).
To prevent contamination, clean the equipment thoroughly. Nonfood-contact surfaces of equipment shall be kept clean.


Inspection Information


Facility Type: Commercial FSO < 25000 sq. ft.

[?] Inspection Type: Standard

Inspection Date: 21-December-2017


Comments
The kitchen hand washing sink was not working, but was able to be fixed at time of inspection. The hand washing sinks shall be in good working order at all times during operation. There are currently 7 total hand washing sinks (including bathrooms). Recommend installing another kitchen hand washing sink to provide easier access. Each sink is required to be stocked at all times (paper towels, soap, and sign). Also, each sink shall provide adequate water pressure and a minimum water temperature of 100 degrees F. Hand washing shall only be done in hand washing sinks; and no other task performed in hand washing sinks.

Each menu item that is offered under cooked shall include the proper consumer advisory.

The glass door coolers are only permitted to store packaged products per manufacturer.

Proper food defense was discussed with the PIC and handouts provided.