[?] A summary of the violations found during the inspection are listed below.

3717-1-06.1(M) / Outer openings - protected.
Repeat Outer back door without proper protection against the entry of insects and rodents (not self-closing).

3717-1-02.2(G) / Jewelry - prohibition.
Food employees wearing jewelry on arms or hands during food preparation.

3717-1-03.2(G) / Washing fruits and vegetables.
Observed banana sliced through the peel without washing or washed improperly next to the hand sink in the back prep area. See license limitation, the facility is not equipped with a properly plumber sink. Banana shall be peeled before slicing. Other produce shall be pre washed from the supplier.

3717-1-03.2(K) / In-use utensils - between-use storage.
Corrected During Inspection In-use utensils improperly stored. Observed lid stored in the sprinkle container used as a scoop.

3717-1-04.5(A)(3) / Cleanliness of nonfood-contact surfaces of equipment.
Observed an accumulation of food residue and other debris on the following nonfood-contact surfaces of equipment: 1) Shelving in walk-in refrigeration. 2) Walls under the condensor and behind the shelving unit in the walk-in refigeration unit. 3) Gaskets and handles for multiple freezer and refrigeration units (damaged gaskets shall be repaired).

3717-1-06.1(A) / Floors, walls, and ceilings.
Repeat Walls and ceilings not smooth and easily cleanable throughout the facility. Observed unfinished surfaces and missing ceiling tiles within the facility.


Inspection Information


Facility Type: Commercial FSO < 25000 sq. ft.

[?] Inspection Type: Standard

Inspection Date: 08-February-2023


Comments
Handwashing sinks shall only be used for handwashing. Ensure hand sinks are accessible at all times.
Observed black tape across the ceiling in the back storage area with staining and evidence of water leak in the corner.
The walk-in light intensity shall be 10 foot candles during cleaning. Additional lighting may be needed.
If the facility would like to install a screen door, the fire department shall be contacted to discuss.

The violations documented shall be corrected and will be checked during next standard inspection.