3717-1-02.4(A)(2) / PIC - Manager Certification
Repeat Did not observe an ODH manager certificate in the facility during the time of inspection. Facility does not have an employee with manager certification in food protection.

3717-1-04.2(G)(1) / Food temperature measuring devices - availability
Repeat Observed several hot and cold holding units to not have internal thermometers during the time of inspection. Food thermometer not readily accessible.

3717-1-06.1(M) / Outer openings - protected.
Repeat Observed damaged door sweep on exit door near the office during the time of inspection. Outer opening not protected.

3717-1-04.4(A)(2) / Equipment components kept intact, tight, and adjusted
Repeat Observed mop sink to be damaged during the time of inspection. Equipment components are not intact, tight or properly adjusted.

3717-1-04.4(A)(2) / Equipment components kept intact, tight, and adjusted
Repeat Observed walk-on cooler containing the chicken to have a torn gasket during the time of inspection. Equipment components are not intact, tight or properly adjusted.

3717-1-04.4(A)(2) / Equipment components kept intact, tight, and adjusted
Repeat Observed ice build-up in walk-in freezer during the time of inspection. Equipment components are not intact, tight or properly adjusted.

3717-1-04.2(I) / Sanitizing solutions - testing devices.
Repeat Observed sanitizer test kit to be expired during the time of inspection. No sanitizer test kit available.

3717-1-04.5(A)(3) / Cleanliness of nonfood-contact surfaces of equipment.
Repeat Observed floors throughout the back portion of the facility to be dirty during the time of inspection. Non-food contact surfaces of equipment are unclean.

3717-1-04.5(A)(3) / Cleanliness of nonfood-contact surfaces of equipment.
Repeat Observed debris build-up in both microwaves during the time of inspection. Non-food contact surfaces of equipment are unclean.

3717-1-06.1(C) / Floor and wall junctures - coved, and enclosed or sealed.
Repeat Observed caulk to back hand sink to be damaged during the time of inspection. Floor and wall junctures not properly coved or closed and/or floor drains not provided.