3717-1-04.4(A)(1) / Equipment - good repair and proper adjustment.
Observed walk in cooler with ice buildup on unit. Equipment and/or components are not maintained in good working order.
Equipment shall be maintained in a state of repair and condition that meets the requirements specified under rules 3717-1-04 and 3717-1-04.1 of this code.
3717-1-04.5(A)(3) / Cleanliness of nonfood-contact surfaces of equipment.
Repeat Observed buildup in the dish area spray nozzle. Non-food contact surfaces of equipment are dirty.
Nonfood-contact surfaces of equipment shall be kept clean.
3717-1-04.5(A)(3) / Cleanliness of nonfood-contact surfaces of equipment.
Observed multiple gaskets with debris accumulation. Non-food contact surfaces of equipment are dirty.
Nonfood-contact surfaces of equipment shall be kept clean.
3717-1-04.8(A) / Equipment and utensils - air-drying required.
Observed improper nesting of wet containers. Equipment and utensils are not being air dried.
After cleaning and sanitizing, equipment and utensils shall be air-dried or used after adequate draining before contact with food and utensils, and may not be cloth dried.
3717-1-06.4(D) / Cleaning ventilation systems, nuisance and discharge prohibition.
Repeat Observed buildup on some of the ventilation system covers. The ventilation system was not being properly cleaned or was creating a public health hazard.
Intake and exhaust air ducts shall be cleaned and filters changed so they are not a source of contamination. If vented to the outside, ventilation systems may not create a public health hazard or nuisance or unlawful discharge.
3717-1-06.4(F) / Drying mops.
Corrected During Inspection Observed mops being dried using an unapproved method.
After use, mops shall be placed in a position that allows them to air-dry without soiling walls, equipment, or supplies.