[?] A summary of the violations found during the inspection are listed below.

3717-1-04.4(N)(1) / Manual and mechanical warewashing equipment, using chemical sanitization (chlorine) - temp., pH, concentration, and hardness
Critical Corrected During Inspection The concentration and/or temperature of a chlorine sanitizing solution did not meet the minimum requirements for concentration. An employee replaced the sanitizer.
To prevent pathogen growth, a chlorine solution shall have a minimum temperature based on the concentration and pH of the solution as specified in the code.
3717-1-05.1(O)(2) / Using a handwashing sink - other uses prohibited.
Critical Observed water being dumped down the handsink. Handwashing sink is being used for purposes other than handwashing.
To prevent contamination, a handwashing sink may not be used for purposes other than handwashing.

3717-1-03.2(M) / Wiping cloths - use limitation.
Repeat Observed wiping cloths being stored in a sanitizer not at the correct ppms.
(1) Cloths that are in use for wiping food spills from tableware and carry-out container that occur as food is being served shall be maintained dry and used for no other purpose; (2) Cloths that are in use for wiping counters and other equipment surfaces shall be: (a) held between uses in a chemical sanitizer of the appropriate concentration; and (b) shall be laundered daily; (3) Cloths that are used with raw animal foods shall be kept separate from cloths used for other purposes; (4) Dry wiping cloths and the chemical sanitizing solution in which wet wiping cloths are held between uses shall be free of food debris and visible soil; (5) Containers of chemical sanitizing solutions specified in paragraph (M)(2)(a) of this rule in which wet wiping cloths are held between uses shall be stored off the floor and used in a manner that prevents contamination of food, equipment, utensils, linens, single-service articles, or single-use articles; (6) Single-use disposable sanitizer wipes shall be used in accordance with EPA-approved manufacturer's label use instructions.
3717-1-04.1(Y) / Temperature measuring devices.
The kindergarden milk cooler external thermometer was not working properly. A thermometer should be placed in the unit.
A properly designed temperature measuring device as specified in this rule shall be located in the warmest part of a cooling unit or the coolest part of a food warming unit.
3717-1-04.2(H)(2) / Temperature measuring devices - mechanical warewashing.
An irreversible registering temperature indicator (thermometer or labels) was not readily accessible in hot water mechanical warewashing operations.
A temperature measuring device is essential to monitor mechanical ware washing to ensure sanitization.


Inspection Information


[?] Facility Type: Non-Commercial FSO < 25000 sq. ft.

[?] Inspection Type: Standard

Inspection Date: 03-November-2016


Comments
This firm is cooking, cooling, and reheating and should be moved to a risk level IV March 1, 2017.