[?] A summary of the violations found during the inspection are listed below.

No critical violations were documented at the time of inspection.

No violations were documented at the time of inspection.


Inspection Information


[?] Facility Type: Commercial FSO < 25000 sq. ft.

[?] Inspection Type: Follow-up

Inspection Date: 25-June-2021


The following violation(s) have been corrected since the last inspection.
3717-1-04.1(Y)/Temperature measuring devices.
Did not observe a thermometer in the make table. Hot and cold holding equipment thermometer was missing, located incorrectly, or not easily readable.
3717-1-04.4(A)(2)/Equipment components kept intact, tight, and adjusted
Observed broken door latches on both the walk in cooler and walk in freezer. Equipment components are not intact, tight or properly adjusted.
3717-1-04.4(A)(2)/Equipment components kept intact, tight, and adjusted
Observed torn gaskets on the walk in cooler, walk in freezer, and 2 make tables. Equipment components are not intact, tight or properly adjusted.
3717-1-06.4(B)/Cleaning - frequency and restrictions.
Observed a mop drying and dripping directly onto the floor by the 3 bay sink. Facility not maintained clean.
Comments
All previous violations corrected at the time of inspection.