[?] A summary of the violations found during the inspection are listed below.

3717-1-07(B) / Poisonous or toxic materials: Working containers - common name.
Critical Corrected During Inspection Observed a unlabled chemcial spray bottle. Person-in-charge labeled the container. Observed working containers of poisonous or toxic chemicals that were not properly labeled with the name of the material.
To prevent health hazards, working containers used for poisonous or toxic materials such as cleaners and sanitizers taken from bulk supplies shall be clearly and individually identified with the common name of the material.

3717-1-03.2(M) / Wiping cloths - use limitation.
Observed wet wiping cloths stored in a soapy water solution. Observed improper use and/or maintenance of wiping cloths.
(1) Cloths that are in use for wiping food spills from tableware and carry-out container that occur as food is being served shall be maintained dry and used for no other purpose; (2) Cloths that are in use for wiping counters and other equipment surfaces shall be: (a) held between uses in a chemical sanitizer of the appropriate concentration; and (b) shall be laundered daily; (3) Cloths that are used with raw animal foods shall be kept separate from cloths used for other purposes; (4) Dry wiping cloths and the chemical sanitizing solution in which wet wiping cloths are held between uses shall be free of food debris and visible soil; (5) Containers of chemical sanitizing solutions specified in paragraph (M)(2)(a) of this rule in which wet wiping cloths are held between uses shall be stored off the floor and used in a manner that prevents contamination of food, equipment, utensils, linens, single-service articles, or single-use articles; (6) Single-use disposable sanitizer wipes shall be used in accordance with EPA-approved manufacturer's label use instructions.
3717-1-04.2(H)(2) / Temperature measuring devices - mechanical warewashing.
An irreversible registering temperature indicator (thermometer or labels) was not readily accessible in hot water mechanical warewashing operations.
A temperature measuring device is essential to monitor mechanical ware washing to ensure sanitization.


Inspection Information


[?] Facility Type: Non-Commercial FSO < 25000 sq. ft.

[?] Inspection Type: Standard

Inspection Date: 20-April-2017