[?] A summary of the violations found during the inspection are listed below.

3717-1-04.5(A)(1) / Cleanliness of equipment food-contact surfaces and utensils.
Critical Cutting board with excessive build-up..
To prevent contamination, equipment food-contact surfaces and utensils shall be clean to sight and touch.

3717-1-03.2(D) / Food storage containers - identified with common name of food.
Corrected During Inspection Food storage containers are not properly labeled. Two containers without labeling.
Working containers holding food or food ingredients that are removed from their original packages shall be identified with the common name of the food, except containers holding food that are readily and unmistakably recognized.
3717-1-04.4(A)(1) / Equipment - good repair and proper adjustment.
Walk-in freezer has excessive ice build-up..
Equipment shall be maintained in a state of repair and condition that meets the requirements specified under rules 3717-1-04 and 3717-1-04.1 of this code.
3717-1-06.2(I)(1) / Lighting - intensity (10)
One light is out in the walk-in freezer..
The light intensity shall be at least ten foot candles (one hundred eight lux) at a distance of thirty inches (seventy-five centimeters) above the floor, in walk-in refrigeration units and dry food storage areas and in other areas and rooms during periods of cleaning.
3717-1-06.2(I)(3) / Lighting - intensity (50)
The light intensity in an area where an employee was working with food, utensils or equipment was less than fifty foot candles. One light is out at the exhaust hood.
The light intensity shall be at least fifty foot candles (five hundred forty lux) at a surface where a food employee is working with food, utensils or equipment such as knives, slicers, grinders, or saws where employee safety is a factor.


Inspection Information


[?] Facility Type: Commercial FSO < 25000 sq. ft.

[?] Inspection Type: Standard

Inspection Date: 21-December-2015