[?] A summary of the violations found during the inspection are listed below.

3717-1-03.4(F)(1) / Time/temperature controlled for safety food - hot and cold holding.
Critical Corrected During Inspection Observed cold chicken that was packaged in the deli case at 46F in the front of the case and 41F in the back of the case. Person-in-charge took the chicken off the shelf and will have the service case looked at. TCS foods were not being held at the proper temperature.
To prevent the growth of pathogens, except during preparation, cooking, or cooling, or when time is used as a public health control, TCS food shall be held at 135°F or above (except that roasts cooked using time and temperature parameters in 3717-1-03.3 may be held at 130° F), or at 41°F or less.

3717-1-03.5(B) / Honestly presented.
Observed ham sale tags on the deli case without the full name of the product. Honey ham with naturnal juices, chopped ham with water added etc.
Food shall be offered for human consumption that does not mislead or misinform the consumer. Food or color additives, colored overwraps, or lights may not be used to misrepresent the food. The sale of kosher foods shall be in accordance with section 1329.29 of the Revised Code.
3717-1-04(A) / Multiuse utensils and food contact surfaces - material characteristics.
Observed a black display container holding chicken with a broken corner in the meat department. This container can not be sanitized properly. Equipment and/or utensils contain improper materials.
To prevent contamination, materials that are used in the contruction of utensils and food contact surfaces may not allow the migration of deleterious substances or impart colors, odors, or tastes to food and under normal use conditions shall be: Safe; durable, corrosion-resistant, and nonabsorbent; Sufficient in weight and thickness to withstand repeated warewashing; finished to have a smooth, easily cleanable surface; and resistant to pitting, chipping, crazing, scratching, scoring, distortion, and decomposition.
3717-1-04(A) / Multiuse utensils and food contact surfaces - material characteristics.
Observed a plastic lid in the bakery with a broken corner. This lid can no longer be sanitized properly. Equipment and/or utensils contain improper materials.
To prevent contamination, materials that are used in the contruction of utensils and food contact surfaces may not allow the migration of deleterious substances or impart colors, odors, or tastes to food and under normal use conditions shall be: Safe; durable, corrosion-resistant, and nonabsorbent; Sufficient in weight and thickness to withstand repeated warewashing; finished to have a smooth, easily cleanable surface; and resistant to pitting, chipping, crazing, scratching, scoring, distortion, and decomposition.
3717-1-04.1(D) / CIP equipment - cleanability.
Repeat The base of the deli slicer's should be washed, rinised, sanitized when broken apart. The facility's clean-in-place (CIP) equipment was not being properly cleaned and sanitized or monitored.
To prevent contamination: (1) CIP equipment shall meet the characteristics specified under paragraph (C) of this rule and shall be designed and constructed so that: (a) cleaning and sanitizing solutions circulate throughout a fixed system and contact all interior food-contact surfaces, and (b) the system is self-draining or capable of being completely drained of cleaning and sanitizing solutions; and (2) CIP equipment that is not designed to be disassembled for cleaning shall be designed with inspection access points to ensure that all interior food contact surfaces throughout the fixed system are being effectively cleaned.
3717-1-04.4(A)(1) / Equipment - good repair and proper adjustment.
Observed the deli cooler storing the cold chicken not properly keeping foods under 41F. Person-in-charge placed a work order in to have the unit looked at. Equipment and/or components are not maintained in good working order.
Equipment shall be maintained in a state of repair and condition that meets the requirements specified under rules 3717-1-04 and 3717-1-04.1 of this code.


Inspection Information


[?] Facility Type: Commercial RFE ≥ 25000 sq. ft.

[?] Inspection Type: Standard

Inspection Date: 14-September-2016