[?] A summary of the violations found during the inspection are listed below.

3717-1-02.4(A)(2) / Person in charge: assignment of responsibility.
Facility did not have one employee with supervisory and management responsibility and the authority to direct and control food preparation and service with level two certification in food protection.
At least one employee that has supervisory and management responsibility and the authority to direct and control food preparation and service shall obtain the level two certification in food protection according to rule 3701-21-25 of the Administrative Code.
3717-1-03.2(D) / Food storage containers - identified with common name of food.
Food storage containers are not properly labeled.
Working containers holding food or food ingredients that are removed from their original packages shall be identified with the common name of the food, except containers holding food that are readily and unmistakably recognized.
3717-1-03.2(K) / In-use utensils - between-use storage.
Observed scoops that the handel was touching the food. In-use utensils are improperly stored.
During pauses in food preparation or dispensing, food preparation and dispensing utensils shall be stored as described in this rule.
3717-1-04(A) / Multiuse utensils and food contact surfaces - material characteristics.
Observed the use of damaged whisks that can not be washed properly.
To prevent contamination, materials that are used in the construction of utensils and food contact surfaces may not allow the migration of deleterious substances or impart colors, odors, or tastes to food and under normal use conditions shall be: Safe; durable, corrosion-resistant, and nonabsorbent; Sufficient in weight and thickness to withstand repeated warewashing; finished to have a smooth, easily cleanable surface; and resistant to pitting, chipping, crazing, scratching, scoring, distortion, and decomposition.
3717-1-04(A) / Multiuse utensils and food contact surfaces - material characteristics.
Observed a rubbermaid lid with a crack.
To prevent contamination, materials that are used in the construction of utensils and food contact surfaces may not allow the migration of deleterious substances or impart colors, odors, or tastes to food and under normal use conditions shall be: Safe; durable, corrosion-resistant, and nonabsorbent; Sufficient in weight and thickness to withstand repeated warewashing; finished to have a smooth, easily cleanable surface; and resistant to pitting, chipping, crazing, scratching, scoring, distortion, and decomposition.
3717-1-04(A) / Multiuse utensils and food contact surfaces - material characteristics.
Observed oatmeal and flour stored in non-food grade containers.
To prevent contamination, materials that are used in the construction of utensils and food contact surfaces may not allow the migration of deleterious substances or impart colors, odors, or tastes to food and under normal use conditions shall be: Safe; durable, corrosion-resistant, and nonabsorbent; Sufficient in weight and thickness to withstand repeated warewashing; finished to have a smooth, easily cleanable surface; and resistant to pitting, chipping, crazing, scratching, scoring, distortion, and decomposition.
3717-1-04.3(B) / Fixed equipment installation - spacing or sealing.
Repeat Observed the handwashing sink by the walk-in cooler needing sealed. Fixed equipment did not appear to be properly sealed or spaced for cleaning.
Equipment that is fixed shall be installed so that it is spaced to allow access for cleaning, from adjoining equipment, walls, and ceilings a distance of not more than one thirty-second inch or one millimeter; or sealed to adjoining equipment or walls, if the equipment is exposed to spillage or seepage; Counter-mounted equipment shall be installed to allow cleaning of the equipment and areas underneath and around the equipment as specified in this rule.
3717-1-05.1(S)(1) / Plumbing system - maintained in good repair.
Repeat Observed a leaking handsink and sink by the dishwasher.


Inspection Information


[?] Facility Type: Commercial FSO < 25000 sq. ft.

[?] Inspection Type: Standard

Inspection Date: 02-February-2018