3717-1-04.4(A)(2) / Equipment components kept intact, tight, and adjusted
Repeat Observed the door of the walk in cooler still needing repaired. Door is hard to shut and need repaired to avoid it not being closed properly and potentially affect the temperature inside the cooler. Equipment components are not intact, tight or properly adjusted.
3717-1-04.5(A)(3) / Cleanliness of nonfood-contact surfaces of equipment.
Repeat Observed the door, fan unit and walls of the walk in cooler rusty. Non-food contact surfaces of equipment are unclean.
[?] Facility Type: Commercial RFE < 25000 sq. ft.
[?] Inspection Type: Follow-up
Inspection Date: 28-April-2020
| The following violation(s) have been corrected since the last inspection. |
|---|
| 3717-1-04.4(A)(2)/Equipment components kept intact, tight, and adjusted Observed the walk in cooler not working properly. Temperature inside was above 41F at the time of inspection. PIC stated maintenance will be contacted to come in today and take a look. Equipment components are not intact, tight or properly adjusted. |
| 3717-1-05.4(N)/Covering receptacles. Observed dumpster lid open. Observed the dumpster overflowing that lid would not close. Waste receptacles not covered properly. |