No critical violations were documented at the time of inspection.
No violations were documented at the time of inspection.
Facility Type: Commercial FSO < 25000 sq. ft.
[?] Inspection Type: Follow-up
Inspection Date: 17-January-2015
| The following violation(s) have been corrected since the last inspection. |
|---|
| 3717-1-04.4(M)/Mechanical warewashing equipment - sanitization pressure. The water flow pressure in a warewashing machine is not adequate. Final rinse pressure was 14 psi and the machine data plate states required pressure of between 15-25 psi. The flow pressure of the fresh hot water sanitizing rinse in a warewashing machine, as measured in the water line immediately downstream or upstream from the fresh hot water sanitizing rinse control valve, shall be within the range specified on the machine's data plate and not be less than five pounds per square inch or more than thirty pounds per square inch. ADJUST THE DISHWASHER FINAL RINSE WATER PRESSURE TO BETWEEN 15 AND 25 PSI. Correct By: 22-Nov-2014 |
| Comments |
|---|
| The violations from the Nov 15, 2014 inspection have been corrected -the pressure gauge on the dishwasher is working and the pressure was 18 psi on the final rinse. NO VIOLATIONS SEEN |