[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (B)(6)(i) / A means of determining rate-of-flow on all water pumps
A means of determining rate-of-flow was not found for all water pumps. Flow meter was observed to be stuck.
Properly install a flow meter or have a pump curve available for every water pump used for the pool. Correct By: 15-Jun-2023
3701-31-04 (C)(2) / pH is within 7.2 to 7.8
pH was outside the range of 7.2 to 7.8. pH observed at 7.0
Treat the pool water so that the pH is within the acceptable range. Correct By: 15-Jun-2023
3701-31-04 (C)(3) / Total alkalinity is at or greater than 60 ppm
Total alkalinity was less than 60 ppm. Observed at 10ppm.
Raise the total alkalinity to at least 60 ppm. Correct By: 15-Jun-2023


Inspection Information


Facility Type: Pool

[?] Inspection Type: Standard

Inspection Date: 14-June-2023

Comments
Low alkalinity and low pH at the time of inspection. Flow meter was stuck. All other water quality parameters were within the required ranges at this time. Please adjust the chemicals accordingly. AT