< Previous Inspection ۸ Up to Facility
[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (B)(6)(i) / A means of determining rate-of-flow on all water pumps
Repeat A means of determining rate-of-flow was not found for all water pumps.
Properly install a flow meter or have a pump curve available for every water pump used for the pool. Correct By: 28-Aug-2023


Inspection Information


Facility Type: Pool

[?] Inspection Type: Standard

Inspection Date: 24-August-2023

Comments
If there is not a functioning ACC present, the pool water should be tested and documented at least every 4 hours. There needs to be a flow meter installed to get a flow reading. All other water quality parameters were in the required ranges at the time of inspection. No other problems noted.